Indicators
Instructions to the status and descriptions on each indicator of the 4G router.
Last updated
Instructions to the status and descriptions on each indicator of the 4G router.
Last updated
There are four indicators on the 4G router. From up to down, the left side is system & Wi-Fi, and the right is Power and Mobile. Below are the indicator descriptions.
Indicator | Status | Description |
---|---|---|
System
Green
This light indicates that the router is receiving power. If it's lit solid green, then the router has booted successfully.
Flash
The router system is booting up. The system indicator flashes while resetting or flashing the firmware.
Off
No light at all indicates that the router is not receiving power. Check the PoE socket connect to the motherboard and check the PoE adapter. You might need to test an alternate power socket if the router doesn't power on.
WiFi
Green
This light indicates that the modem is sending a Wi-Fi signal. If the light is on the green, you can see and connect to the Wi-Fi network.
Flash
If you are connected to the Wi-Fi hotspot, it will flash green to indicate data going to and from the router. If the router is connected to another Wi-Fi hotspot (Wi-Fi relay), it will also flash because it has the data flow.
Off
If it's off, your router is no longer sending a Wi-Fi signal. You can log in to the router admin and turn on the Wi-Fi master hotspot.
Power
On
After connected to the DC power adapter, it will turns on.
Mobile
Green
It shows the mobile connection status. Stay on green color means connected to the mobile network.