> For the complete documentation index, see [llms.txt](https://indoor.router.works/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://indoor.router.works/manual/installation/install-antennas.md).

# Install Antennas

Please check the chart and image below about which antenna goes to which socket.

| Antenna Sockets         | Antenna Marks |
| ----------------------- | ------------- |
| 4x Mobile (Side Panels) | 5G-NR Antenna |
| 3x Wi-Fi (Back Panel)   | Wi-Fi 6       |

The mobile antennas are wide paddle antennas with the printed mark "5G-NR Antenna." Their antenna sockets are on the left and right side panels, and they have "Mobile" marks.

The thinner Wi-Fi whip antennas have the printed "Wi-Fi 6" mark on the top end. The "Wi-Fi" antenna sockets are on the back panel.

To install the antennas, twist the connectors clockwise onto the router until they are securely fastened. Then, connect the antennas to the correct sockets, as shown in the image below. 

Only twist the connectors; do not excessively turn the antenna bodies, as this could damage the antenna pin or internal wiring. All the antennas have vertical polarization. Once installed on the router, ensure all antennas remain upright and vertical for the best possible reception and range.

<figure><img src="/files/VJCS4z3weQIbOUP1X0cf" alt=""><figcaption><p>Mobile 5G-NR Antenna and Wi-Fi 6 Antennas</p></figcaption></figure>

{% hint style="info" %}
The flat panels of the 5G paddle antennas have a higher performance. Please adjust the paddle direction towards the outside or signal source to receive a better signal.
{% endhint %}

{% hint style="warning" %}
To ensure optimal performance of your 5G router, position the device away from potential sources of radio frequency interference, such as microwave ovens, radio transmission equipment, and high-power electrical appliances.
{% endhint %}