Network Interfaces
The network interfaces on the 5G router.
Last updated
The network interfaces on the 5G router.
Last updated
After logging in to the router, go to Network > Interfaces To view and manage the network interfaces.
The brief information of each interface is listed under the second column, including MAC address, Rx (Download), Tx (Upload), Uptime, and IP address.
Do not click "Stop" on the LAN interface or "Delete" on any of the interfaces. It will make the router malfunction.
This is the interface of the leading local intranet network. It is assigned to the physical RJ45 port eth0.1. Refer to the below section to configure the local intranet networks.
This is the mobile modem interface.
Uptime: The activated mobile connection period. RX/TX: The real-time data stream on mobile internet. IPv4: The mobile internet IP address. Mostly a private IP.
The 5G router automatically connects to the mobile network when started up. You can manually Stop or Connect the mobile modem by clicking the related buttons. After successfully connecting to the 4G/5G mobile networks, Rx/Tx shows the real-time data stream and the IPv4 IP address.
The WAN port is bound to the eth0.2 RJ45 port, which is marked "WAN" on the enclosure.
DHCP client protocol It is enabled on the WAN interface and can automatically obtain the IP address after being connected to the LAN port on another internet router or modem. You can use the PPPoE protocol when linking to a landline modem and turning on the bridge mode.
Click the "Edit" button to change mobile protocol, APN, SIM card, PIN code, etc. Refer to settings.
