WiFi Hotspots

Wi-Fi hotspots have been turned on by default, and the default Wi-Fi hotspots are Cell-WiFi-xxxx-V4 and V5.

Wireless Overview

After accessing the router, go to Network > Wireless. This page lists the Wi-Fi configuration section of the physical radio. You can configure the Wi-Fi hotspot and the Wi-Fi relay.

• mt7615e2 is the WiFi4 (2.4GHz) WiFi network

• SSID Cell-WiFi-xxxx-V4 | Mode: Master is the primary 2.4G WiFi hotspot,

• SSID xxxx | Mode: Client The WiFi relay connection appears after setting up the WiFi relay.

• mt7615e5 is the WiFi5 (5.8GHz) WiFi network

• SSID Cell-WiFi-xxxx-V5 | Mode: Master is the primary 5.8G WiFi hotspot

• SSID xxxx | Mode: Client The WiFi relay connection appears after setting up the WiFi relay.

4G Router WiFi Hotspot Overview

User Status

Go to "WiFi > User Status" to check the connected WiFi client devices.

Wi-Fi Hotspot

Click the "Edit" button on the WiFi SSID row to enter the configure section.

i. General Setup

In the section "Device Configuration > General Setup," you can monitor the WiFi network status and configure its "Network Mode / Channel / Bandwidth."

We suggest keeping the default settings with no changes to avoid conflicts.

ii. Advanced Settings

In the "Device Configuration" section, click the tab of "Advanced Settings" to choose the "Country Code / Support Channel / TX Power."

iii. Wi-Fi SSID & Password

In the downward section of "Interface Configuration," we can edit the WiFi SSID (WiFi hotspot name) on the "ESSID" field.

• ESSID: WiFi hotspot name

• Mode: Keep the "Access Point"

• Network: Keep the "LAN"

• Hide ESSID: It will hide the WiFi broadcast signals after enabling it.

Edit WiFi Hotspot Name on 4G Router

After enabling the Hide ESSID function, the router stops broadcasting the WiFi hotspot but maintains the WiFi connection when manually entering the WiFi hotspot name and password.

WMM (WiFi Multimedia) is an automated way of handling Quality of Service (QoS) on the Wi-Fi network that provides improved video and voice performance over the wireless network.

Click the "Wireless Security" tab to enter the encryption section and configure the WiFi password.

• Encryption: Select an encryption method. e.g., WPA-PSA/WPA2-PSK is recommended for home and small office networks.

• Cipher: The default "Force CCMP (AES)" is recommended.

• Key Renewal: Leave it blank.

• Key: The WiFi password is a secret phrase clients must use to connect to your WiFi network. With WPA-PSK encryption, the Key must be at least eight characters.

Edit WiFi Hotspot Password Encryption on 4G Router

Finally, click the "Save & Apply" button on the bottom right corner to take effect on the above WiFi settings. It will reboot the WiFi hotspot in 2~3 minutes.