Network Interfaces
The network interfaces on the 4G router.
Last updated
The network interfaces on the 4G router.
Last updated
After logging in to the router, go to Network
> Interfaces
To view and manage the network interfaces.
The brief information of each interface is listed under the second column, including MAC address, Rx (Download), Tx (Upload), Uptime, and IP address.
Do not Stop
use the LAN interface or Delete
any of the interfaces.
It will make the router misfunctioning.
The color on each interface does not correspond to its connection status.
Rx/Tx indicates the real-time data stream instead of the internet speed.
This interface is bound to the Guest's WiFi. It uses a separate subnet, 192.168.100.1. Terminals connecting to the Guest WiFi cannot access the hosts or servers under the main subnet 192.168.20.1.
The Guest WiFi hotspots are turned off on the default settings. You can enable them under "Network > Wireless."
This is the interface of the main local intranet network. It is assigned to the physical RJ45 port eth0.1
. Refer to the below section to configure the local intranet networks.
This is the mobile modem interface. The 4G router uses the SIM#1 slot.
Uptime: The activated mobile connection period. RX/TX: The real-time data stream on mobile internet. IPv4: The mobile internet IP address. Mostly a private IP.
Click the "Edit" button to change mobile protocol, APN, SIM card, PIN code, etc. Refer to the Mobile Modem settings.
The 4G router automatically connects to the mobile network when started up. You can manually Stop or Connect the 4G modem by clicking the related buttons. After connecting to the 4G network, Rx/Tx shows the real-time data stream and the IPv4 IP address.
The WAN
port is bound to the eth0.2
RJ45 port, which is marked "WAN" on the enclosure.
DHCP client protocol
Is enabled on the WAN interface, and it can automatically obtain the IP address after being connected to the LAN port on another internet router or modem.
These are the virtual interfaces for the Wi-Fi relay connections on 2.4GHz and 5.8GHz. You can wirelessly connect the WiFi relay to the 4G router to another WiFi hotspot.