System Admin
Here are the basic system settings that should be configured during the initial setup.
Last updated
Here are the basic system settings that should be configured during the initial setup.
Last updated
Click "System > System" on the left menu to access the system properties page.
Since the NTP client is turned on under "Time Synchronization," the router can automatically sync with the time server after being connected to the Internet. You can also force sync the time by clicking the "Sync with browser" or "Sync with NTP Server" buttons under the General Settings tab.
After syncing the time, please select the correct time zone and click the "Save & Apply" button in the bottom right corner to save your new settings.
You can customize the "Hostname" to rename the router device, and it will display on the top left-side corner after clicking the "Save & Apply" button.
To change the router password, click "System > Administration" and enter the new password twice in the "Router Password" section, then click the "Save" button at the bottom right corner to take effect.
It is critical to record your custom router password in a secure location. If you lose or forget it, the only way to regain access to the router admin panel is to perform a hard reset. This will erase all custom configurations and return the device to its factory default settings.
