Install Antennas
The 5G router uses MIMO antennas on both mobile and Wi-Fi connections.
Last updated
The 5G router uses MIMO antennas on both mobile and Wi-Fi connections.
Last updated
Please check the chart and image below about which antenna goes to which socket.
| Antenna Sockets | Antenna Marks |
|---|---|
Mobile 1 *Main | 5G paddle antenna (Main Port) |
Mobile 2~3~4 | 5G paddle antenna |
WiFi 4 | Either WiFi4 whip antenna |
WiFi 5 | Either WiFi5 whip antenna |
The 5G and Wi-Fi antennas have printed marks on their connectors to indicate which ports they attach to for proper configuration. Be sure to connect the 5G, WiFi4, and WiFi5 antennas to their correctly labeled antenna sockets on the router, as shown in the below image.
To install the antennas, twist the antenna connectors clockwise onto the router until securely fastened. Only twist the connectors—do not excessively turn the antenna bodies, as it could damage the antenna pin or internal wiring.
All the antennas have vertical polarization. Ensure all antennas remain upright vertical once installed on the router for the best possible reception and range.
The flat panels of the 5G paddle antennas have a higher performance. Please adjust the paddle direction towards the outside or signal source to receive a better signal.
To ensure optimal performance of your 5G router, position the device away from potential sources of radio frequency interference, such as microwave ovens, radio transmission equipment, and high-power electrical appliances.
